cerabone® - natural bovine bone grafting material

cerabone®

Natural bovine bone grafting material
Owing to its reliability and treatment predictability, bovine bone grafting material is the material of choice for the majority of dentists. cerabone® is a highly reliable, dimensionally stable and safe bone graft. It is derived from the mineral phase of bovine bone, which shows strong resemblance to the human bone with regard to chemical composition, porosity, and surface structure.
  • Socket and ridge preservation
  • Furcation defects (class I-II)
  • Ridge augmentation
  • Peri-implant defects
  • Intraosseous defects (1-3 walls)
  • Sinus lift

Rehydration

Rehydration in blood from the defect site or saline solution is not necessary but facilitates handling and application since the wetted cerabone® granules stick together.

Particle compression

Avoid compressing the particles excessively during application; less packed particles leave space for blood vessel ingrowth and formation of new bone matrix.

Healing time

A healing time of at least 6 months is recommended before re-entry to ensure stable integration of the particles.

Mixing of material

Mixing of cerabone® with autologous bone bring about a biological activity (osteo-inductive and osteo-genetic properties of autologous bone) and supports faster regeneration and improved formation of new bone.

GBR with cerabone® and Jason® membrane in the front tooth region - Dr. H. Maghaireh

Initial clinical situation with gum recession and labial bone loss eight weeks following tooth extraction

botiss cerabone® & Jason® membrane for horizontal augmentation - Clinical case by Dr. M. Steigmann

Three implants placed in a narrow posterior mandible

botiss cerabone® & collprotect® membrane for GBR - Clinical case by Dr. V. Kalenchuk

Clinical situation with narrow alveolar ridge in the lower jaw

botiss cerabone® & Jason® membrane for GBR - clinical case by Dr. S. Stavar

Initial clinical situation with broken bridge abutment in regio 12 and tooth 21 not worth preserving

Restoration of all four incisors with two maxgraft® bonering - Dr. B Giesenhagen

Initial situation pre-op: Central incisors with mobility 3

Block augmentation with maxgraft® in the maxilla - Dr. R. Cutts

Initial situation: 40 year old female patient with extensive scar tissue after several surgeries restored with a Rochette bridge

Socket preservation with cerabone® - Dr. P. Kämmerer

Extraction socket grafted with cerabone.

Socket preservation using cerbaone® and permamem® - Dr. A. Caiazzo

Grafting of the extraction socket with small cerabone® granules.

GBR with Jason membrane® and cerabone® - D. Fontana

Lateral view of the defect in the posterior right maxilla.

Sinus lift one-stage with cerabone® and collprotect® membrane - Dr. V. Kalenchuk

Clinical situation of the edentulous distal maxilla before the surgery

botiss cerabone for ridge splitting and augmentation of an atrophic alveolar ridge - Clinical case by Dr. V. Moshirabadi

Situation before augmentation, atrophic alveolar ridge

cerabone® and mucoderm® for immediacy in esthetic zone -Dr. M Motta

Initial view of the case. Discoloration of 1.1 and mild class I gingival recession

botiss cerabone® & Jason® membrane for GBR - Clinical case by Prof. Dr. Dr. D. Rothamel

Instable bridge situation with abscess formation at tooth #15 after apicoectomy

botiss cerabone® & Jason® membrane for GBR - Clinical case by Dr. S. Kovalevsky

Implant insertion in atrophic alveolar ridge

Sinus Floor Elevation with maxgraft® bonering and subcrestal implantation in an eggshell thin sinus - Dr. K. Chmielewski

Initial situation: X-ray scan reveals eggshell thin sinus floor (1-3 mm) on both sites of the maxilla; green areas indicate the planned maxgraft® bonerings and red areas the planned implants

Ridge augmentation with maxgraft® bonebuilder and sinus floor elevation – Dr. K.P. Schiechl

Initial clinical situation: Bone defect in the upper right maxilla (teeth #14-16)

Horizontal ridge augmentation with maxgraft® cortico - M.Sc. E. Kapogianni

OPG of the initial situation – provision of missing denture in regio 44 to 47 by a resin-retained bridge

Regenerative corticotomy to compensate lower incisor malocclusion with cerabone® and mucoderm®

Initial view of the clinical case: Class III malocclusion
Treatment plan: Regenerative corticotomy (PAOO)

Socket preservation with cerabone® - Dr. Rahib Adi Nader

Situation before extraction with single tooth crowns on 21 and 22

GBR and soft tissue augmentation with cerabone® and mucoderm® - H. Maghaireh & V. Ivancheva

Initial situation: missing teeth #11 & 12 and badly broken #21 root

Intrabony defect treated using collprotect® membrane & cerabone® (1) - Cosgarea & Sculean

Pre-surgical probing reveals a deep intrabony defect on the distal aspect of the upper canine.

botiss cerabone® & Jason® membrane for block augmentation with autologous bone blocks - clinical case by Dr. S. Stavar

Initial clinical situation with single tooth gap in regio 21

botiss cerabone® & Jason® fleece for immediate implantation - Clinical case by Dr. D. Jelušić

Clinical situation before extraction and implantation

Advanced vertical augmentation in posterior maxilla with maxgraft® bonering - Dr. A. Isser

Initial situation 57-year old female patient. X-ray scan reveals severe bone loss due to inflammation in region 13. Treatment plan was extraction of teeth 13 and 14 and augmentation after healing.

Immediate implant placement using cerabone® and Jason® fleece - Dr. D. Jelušić

Pre-operative situation showing tooth 21 with deep periodontal pocket. Tooth presented with mobility grade III.

  • Natural bovine bone grafting material
  • Long-term three-dimensional graft stability
  • Rough surface, optimal cell adhesion & blood absorption
  • Interconnective porosity
  • Safe and sterile
  • Easy handling

cerabone® Granules

Article Number

Particle Size

Content

1510

0.5 to 1.0 mm

1 x 0.5 ml

1511

0.5 to 1.0 mm

1 x 1.0 ml

1512

0.5 to 1.0 mm

1 x 2.0 ml

1515

0.5 to 1.0 mm

1 x 5.0 ml

1520

1.0 to 2.0 mm

1 x 0.5 ml

1521

1.0 to 2.0 mm

1 x 1.0 ml

1522

1.0 to 2.0 mm

1 x 2.0 ml

1525

1.0 to 2.0 mm

1 x 5.0 ml

cerabone® Block

Article Number

Dimensions

Content

1720

20 x 20 x 10 mm

1 x Block

Immediate implantation and augmentation by Dr. Derk Siebers
Immediate implantation and augmentation by Dr. Derk Siebers
Lateral sinus lift one-stage by Dr. Derk Siebers
Lateral sinus lift one-stage by Dr. Derk Siebers
Immediate implantation by Dr. Derk Siebers
Immediate implantation by Dr. Derk Siebers
Lateral one-stage sinus lift with cerabone® and Jason® membrane – Dr. Massimo Frosecchi (Italy)
Lateral one-stage sinus lift with cerabone® and Jason® membrane – Dr. Massimo Frosecchi (Italy)
Lateral sinus lift one-stage by Dr. Derk Siebers
Lateral sinus lift one-stage by Dr. Derk Siebers
Socket seal on pig jaw by PD Dr. Dr. D. Rothamel
Socket seal on pig jaw by PD Dr. Dr. D. Rothamel
Augmentation of dehiscence defect by Dr. Marius Steigmann
Augmentation of dehiscence defect by Dr. Marius Steigmann
Ridge preservation by Dr. Derk Siebers
Ridge preservation by Dr. Derk Siebers
Lateral augmentation on pig jaw by PD Dr. Dr. D. Rothamel
Lateral augmentation on pig jaw by PD Dr. Dr. D. Rothamel
GBR with cerabone® and Jason® membrane – Dr. Alfonso Caiazzo (Italy)
GBR with cerabone® and Jason® membrane – Dr. Alfonso Caiazzo (Italy)
cerabone® - natural bovine bone grafting material
cerabone® - excellent biofunctionality - superior hydrophilicity and blood uptake

The pronounced hydrophilicity of the cerabone® surface supports a fast uptake of blood or saline, thus improving handling. Likewise, its three-dimensional porous network enables a fast penetration and adsorption of blood and serum proteins and serves as a reservoir for proteins and growth factors.The unique manufacturing process based on high-temperature heating removes all organic and potentially antigenic components, making the material safe and free of proteins. cerabone® is a natural bovine bone grafting material that is the preferred material for a high number of dentists. Until 2015 more than 400.000 patients in more than 90 countries have been successfully treated with cerabone®.

 

[1] Seidel und Dingeldein. Materialwissenschaft und Werkstofftechnik 2004; Vol. 35 No. 4, pp. 208–212
[2] Becker, Organikum, Ambrosius Verlag 1993; Leipzig
[3] Morrison, Boyd, VCH 1986
[4] Murugan et al. Bulletin of Materials Science 2003;26(5):523-528
[5] Tadic, D. and Epple, M. Biomaterials 2004; Vol. 25 No. 6, pp. 987–994
[6] Brown et al. Proceedings of the National Academy of Sciences of the United States of America 2000; Vol. 97 No. 7, pp. 3418–3421